Dell Latitude D630 LCD Display Inverter Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Inverter on your Dell Latitude D630 laptop. These installation instructions have be made into 13 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude D630 LCD Display Inverter.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screw driver
  • 1 x small plastic scribe
Latitude D630 LCD Inverter

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude D630 LCD Inverter

Video tutorial repair manual



Installation and Removal Instructions
Dell Latitude D630 LCD Display Inverter

Slide the battery down and lift out of the laptop.

Step 1

  • Slide the battery latches to the left and the right.
  • Slide the battery down and lift out of the laptop.
Slide the battery down and lift out of the laptop.  Slide the battery latches to the left and the right.
Unscrew the (2) 2.5mm x 5mm hinge screws on the back edge of the laptop.

Step 2

  • Unscrew the (2) 2.5mm x 5mm bottom hinge screws.
  • Unscrew the (2) 2.5mm x 5mm hinge screws on the back edge of the laptop.
Unscrew the (2) 2.5mm x 5mm hinge screws on the back edge of the laptop. Unscrew the (2) 2.5mm x 5mm bottom hinge screws.
On the right side of the power button cover, use a flat head screw driver to lift and unsnap the power button cover.

Step 3

  • Open the laptop as wide as possible, approximately 180 degrees.
  • On the right side of the power button cover, use a flat head screw driver to lift and unsnap the power button cover.
  • Working from right to left, unsnap the power button cover and lift it from the laptop.
Carefully lift the keyboard up, flip it over, and rest it on the palm rest.

Step 4

  • Unscrew the (3) 2mm x 3mm screws.
  • Carefully lift the keyboard up, flip it over, and rest it on the palm rest.
  • Carefully lift the keyboard up, flip it over, and rest it on the palm rest.
Unplug the keyboard cable by lifting the blue ribbon straight up.

Step 5

  • Unlatch the keyboard cable retaining clip by pivoting the blue clip up.
  • Unplug the keyboard cable by lifting the blue ribbon straight up.
Unplug the keyboard cable by lifting the blue ribbon straight up. Unlatch the keyboard cable retaining clip by pivoting the blue clip up.
Disconnect the WWAN antenna cables.

Step 6

  • Unplug the wireless WLAN antenna cables.
  • Disconnect the WWAN antenna cables.
Disconnect the WWAN antenna cables.Unplug the wireless WLAN antenna cables.
Remove the antenna cables and LCD cable from the routing channels.

Step 7

  • Unplug the LCD cable.
  • Remove the antenna cables and LCD cable from the routing channels.
  • Lift the LCD display assembly away from the laptop base.
Remove the antenna cables and LCD cable from the routing channels.Lift the LCD display assembly away from the laptop base.
Unscrew the (6) 2.5mm x 5mm x 1.5mm bezel screws.

Step 8

  • Remove the screw hole covers.
  • Unscrew the (6) 2.5mm x 5mm x 1.5mm bezel screws.
Unscrew the (6) 2.5mm x 5mm x 1.5mm bezel screws. Remove the screw hole covers.
Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.

Step 9

  • Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.
Unplug and remove the LCD cable from the channel routing. The LCD motherboard connection is located under the keyboard.

Step 10

  • Unplug and remove the LCD cable from the channel routing. The LCD motherboard connection is located under the keyboard.
Unscrew the (6) 2.5mm x 5mm screws at the bottom of the screen.

Step 11

  • Unscrew the (2) 2mm x 3mm screws at the top of the screen.
  • Unscrew the (6) 2.5mm x 5mm screws at the bottom of the screen.
Unscrew the (6) 2.5mm x 5mm screws at the bottom of the screen. Unscrew the (2) 2mm x 3mm screws at the top of the screen.
Unplug the LCD cable from the LCD screen and inverter.

Step 12

  • Lift the LCD screen from the LCD back assembly.
  • Unplug the LCD cable from the LCD screen and inverter.
Remove the LCD inverter screw.

Step 13

  • Unplug the LCD inverter cable.
  • Remove the LCD inverter screw.
  • Slide the LCD inverter out of the mounting bracket.
Remove the LCD inverter screw. Slide the LCD inverter out of the mounting bracket.
Latitude D630 LCD Inverter

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude D630 LCD Inverter

Topics: Dell Latitude D630 Repair Manual Dell Laptop Repair Dell Repair Manuals LCD Inverter Latitude D630

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.