Does my laptop LCD screen need to be replaced?
This will help diagnose the problems and the possible solutions for your needing to laptop.
As the most frequently used and fragile component on a laptop, there are many ways a LCD screen can fail. The most common reasons to replace a LCD screen are physical damage or cracks. Other reasons for replacement could be vertical and/or horizontal lines, dead pixels, a dim screen, or a flickering screen.
- A Cracked Screen:
- Besides from an obvious crack or a spider web crack, most cracks will be under the surface, with the glass inside the LCD screen. To the touch, you may not be able to feel the cracks, but they are fairly visible. You can lightly twist the LCD screen to help make the cracks more visible. Other cracks will appear more like liquid or ink has spilled under the LCD screen.
- Cracked screens are not easily repaired and the screen should be replaced.
- Vertical Lines, Horizontal Lines, and Dead pixels:
- Individual or groups of pixels or a visible line of pixels appears either vertically or horizontally. These dead pixels or lines will not be caused by a video card. The simple test, hook up an external monitor to see if the lines or pixels appear there also. If the lines or pixels do not appear on an external monitor, then the LCD screen most likely bad. Occasionally, dead pixels and lines can be caused by a bad LCD screen ribbon cable. If the dead pixels or lines go away or change positions dependent on the angle of the screen, it could be a damaged LCD screen ribbon cable.
- Dead pixels and lines cannot be easily repaired and the LCD screen or LCD screen ribbon cable should be replaced.
- A Flickering Screen:
- Flickering screens are usually caused by inconsistent power. The LCD inverter, which supplies power to the LCD screen's florescent light bulb, may be failing. When the LCD inverter starts failing it may become hot or start buzzing. Another cause could be if the screen flickers only when the screen is at a certain angle, then you may have a loose or damaged LCD screen ribbon cable.
- You will need to open the laptop and make sure the screen cable is plugged in to the video card, motherboard, and back of the screen. If all of the connections are secure, then replacing the LCD screen ribbon cable or LCD inverter may be necessary.
- Dim Screen:
- A very faint or dim image can be seen on the screen, with the brightness controls turned up, but the image is not bright enough to be usable. This issue is very common with CCFL (Cold Cathode Fluorescent Lamp) type screens. The majority of the time that this occurs with a CCFL, the LCD screen inverter is to blame. The inverter powers the backlight in the screen and if it malfunctions, the screen will stay dim. In the remainder of the cases, the florescent bulb may fail to light up causing the screen to stay dim even with a good working LCD inverter.
- Replacing the LCD inverter is the most inexpensive place to start, but because there are many different LCD screens and LCD inverters, finding an LCD inverter that is compatible with your screen can prove to be difficult. Also, if the LCD screen turns out to be the problem, then you could waste time and money on the LCD inverter. To avoid this problem, I suggest buying a LCD screen with the compatible LCD inverter included.
Read Related Articles
- Dell Inspiron 13-5368 (P69G001) Battery Removal & Installation
- Dell Inspiron 13-5368 (P69G001) Bottom Base Removal & Installation
- Dell Inspiron 15-3551 (P47F002) Battery Removal and Installation
- Dell Inspiron 15-3551 (P47F002) Access Door Removal and Installation
- Dell Inspiron 15-3551 (P47F002) RAM Memory Removal and Installation
- Dell Inspiron 15-3551 (P47F002) Wireless WLAN Card Removal and Installation