Dell Venue 11 Pro (5130) Tablet Motherboard Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the Motherboard on your Venue 11 Pro (5130) laptop. These installation instructions have be made into 15 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Venue 11 Pro (5130) Motherboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Venue Pro 5130 Motherboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Venue 11 Pro 5130 Motherboard

Video tutorial repair manual



Installation and Removal Instructions
Venue 11 Pro (5130) Motherboard

Using a scribe, lift and unsnap the bottom door.

Step 1

  • Using a scribe, lift and unsnap the bottom door.
Using a scribe, lift and unsnap the bottom door.Using a scribe, lift and unsnap the bottom door.
Lift the battery out of the tablet.

Step 2

  • Slide the battery latches over until they click in the unlocked position.
  • Lift the battery out of the tablet.
Lift the battery out of the tablet.Slide the battery latches over until they click in the unlocked position.
Remove the Mirco SD card.

Step 3

  • Press a paperclip into the ejector hole until the SD card carrier ejects.
  • Remove the Mirco SD card.
Remove the Mirco SD card.Press a paperclip into the ejector hole until the SD card carrier ejects.
Remove the cable cover.

Step 4

  • Remove the cable cover screw.
  • Remove the cable cover.
Remove the cable cover.Remove the cable cover screw.
Unplug the cables

Step 5

  • Open the cable latch.
  • Unplug the cables
Unplug the cablesOpen the cable latch.Open the cable latch.Open the cable latch.
Remove the base screws.

Step 6

  • Remove the base screws.
Carefully unsnap the base assembly.

Step 7

  • Carefully unsnap the base assembly.
Carefully unsnap the base assembly.Carefully unsnap the base assembly.
Unplug the SD Card / SIM Card / HDMI circuit board cable.

Step 8

  • Unplug the SD Card / SIM Card / HDMI circuit board cable.
Unplug the USB / Vibrator Motor Circuit Board cable.

Step 9

  • Unplug the USB / Vibrator Motor Circuit Board cable.
Remove the CMOS battery

Step 10

  • Unplug the cable.
  • Remove the CMOS battery
Remove the CMOS batteryUnplug the cable.
Unplug the right speaker cable.

Step 11

  • Unplug the left speaker cable.
  • Unplug the right speaker cable.
Unplug the right speaker cable.Unplug the left speaker cable.
Unplug and remove the rear facing camera.

Step 12

  • Unplug and remove the rear facing camera.
Unplug and remove the rear facing camera.Unplug and remove the rear facing camera.
Unplug the front facing camera

Step 13

  • Unplug the front facing camera
Unplug the LCD cable.

Step 14

  • Unplug and loosen the wireless antenna cables.
  • Unplug the LCD cable.
Unplug the LCD cable.Unplug and loosen the wireless antenna cables.
Remove the small motherboard screws.

Step 15

  • Remove the large motherboard screw.
  • Remove the small motherboard screws.
  • Remove the motherboard.
Remove the small motherboard screws.Remove the motherboard.Remove the large motherboard screw.
Venue Pro 5130 Motherboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Venue 11 Pro 5130 Motherboard

Topics: Dell Venue Tablet Repair Manuals Dell Laptop Repair Dell Repair Manuals Motherboard Venue 11 Pro (5130)

Join the conversation!

4 Responses to Dell Venue 11 Pro (5130) Tablet Motherboard Removal and Installation

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.