Dell Venue 11 Pro (5130) Tablet USB / Vibrator Motor Circuit Board Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the USB / Vibrator Motor Circuit Board on your Venue 11 Pro (5130) laptop. These installation instructions have be made into 9 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Venue 11 Pro (5130) USB / Vibrator Motor Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Venue Pro 5130 Circuit Boards

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Venue 11 Pro 5130 Circuit Boards

Video tutorial repair manual



Installation and Removal Instructions
Venue 11 Pro (5130) USB / Vibrator Motor Circuit Board

Using a scribe, lift and unsnap the bottom door.

Step 1

  • Using a scribe, lift and unsnap the bottom door.
Using a scribe, lift and unsnap the bottom door.Using a scribe, lift and unsnap the bottom door.
Lift the battery out of the tablet.

Step 2

  • Slide the battery latches over until they click in the unlocked position.
  • Lift the battery out of the tablet.
Lift the battery out of the tablet.Slide the battery latches over until they click in the unlocked position.
Remove the Mirco SD card.

Step 3

  • Press a paperclip into the ejector hole until the SD card carrier ejects.
  • Remove the Mirco SD card.
Remove the Mirco SD card.Press a paperclip into the ejector hole until the SD card carrier ejects.
Remove the cable cover.

Step 4

  • Remove the cable cover screw.
  • Remove the cable cover.
Remove the cable cover.Remove the cable cover screw.
Unplug the cables

Step 5

  • Open the cable latch.
  • Unplug the cables
Unplug the cablesOpen the cable latch.Open the cable latch.Open the cable latch.
Remove the base screws.

Step 6

  • Remove the base screws.
Carefully unsnap the base assembly.

Step 7

  • Carefully unsnap the base assembly.
Carefully unsnap the base assembly.Carefully unsnap the base assembly.
Remove the screws.

Step 8

  • Unplug the cable.
  • Remove the screws.
Remove the screws.Unplug the cable.
Remove the vibrator motor.

Step 9

  • Unplug the vibrator motor cable.
  • Remove the vibrator motor.
  • Remove the USB circuit board.
Remove the vibrator motor.Remove the USB circuit board.Unplug the vibrator motor cable.
Venue Pro 5130 Circuit Boards

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Venue 11 Pro 5130 Circuit Boards

Topics: Dell Venue Tablet Repair Manuals Dell Laptop Repair Dell Repair Manuals Circuit Boards USB Venue 11 Pro (5130) Vibrator Motor

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.