In this Dell laptop tutorial we are going to show you how to install and replace the Stylus & Stylus Sheath on your Latitude XT2 laptop. These installation instructions have be made into 11 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude XT2 Stylus & Stylus Sheath.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude XT2 Stylus Sheath
Latitude XT2 Stylus Sheath
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude XT2 Stylus & Stylus Sheath
Step 1
- Slide the latches over.
- Slide the battery out of the laptop.
Step 2
- Loosen the screws.
- Remove the door.
Step 3
- Unplug the antenna cables.
- Remove the bottom screws.
Step 4
- Remove the screws.
- Remove the hinge cover.
Step 5
- Turn the laptop over.
- Remove the rear hinge screws.
Step 6
- Open the laptop.
- Using a flat head screwdriver or a scribe, pry up the hinge cover, starting on the right side and moving left.
Step 7
- Remove the screws.
- Carefully lift the keyboard up & unplug the keyboard cables.
- Remove the keyboard.
Step 8
- Unplug the display cable.
- Loosen the antenna cables.
Step 9
- Remove the bottom hinge screws.
- Remove the display assembly.
Step 10
- Remove the palmrest screws.
- Unplug the cables.
- Unsnap & remove the palmrest.
Step 11
- Unplug the cable.
- Remove the screw.
- Remove the stylus & stylus sheath.
Latitude XT2 Stylus Sheath
Latitude XT2 Stylus Sheath
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|