Dell Latitude 13-7350 (P58G-001) LCD Digitizer Control Panel Removal & Installation


In this Dell laptop tutorial we are going to show you how to install and replace the LCD Digitizer Control Panel on your Latitude 13-7350 (P58G-001) laptop. These installation instructions have be made into 3 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude 13-7350 (P58G-001) LCD Digitizer Control Panel.

Before you begin

Please take the time read the following safety guildlines when working on static sensitive electrical componets.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude 13-7350 LCD Digitizer Control panel

Video tutorial repair manual



Installation and Removal Instructions
Latitude 13-7350 (P58G-001) LCD Digitizer Control Panel

Use fingertips to pry apart and separate LCD Screen Assembly.

Step 1

Unplug and loosen Battery cable.

Step 2

  • Unplug and loosen Battery cable.
  • Unscrew and remove Battery (4 x M2 x 3mm).
Unplug and loosen Battery cable.Unscrew and remove Battery (4 x Unplug and loosen Battery cable.
Disconnect cables.

Step 3

Disconnect cables.Unscrew and remove LCD Digitizer Control Panel (1 x Disconnect cables.Disconnect cables.

Topics: Dell Laptop Repair Dell Latitude Repair Manuals Dell Repair Manuals Latitude 13-7350 LCD Digitizer Control panel

Join the conversation!