Dell Inspiron 15-7537 (P36F001) 7000 Series – LCD Hinges Removal and Installation


In this Dell laptop tutorial we are going to show you how to install and replace the LCD Hinges on your Inspiron 15-7537 (P36F001) laptop. These installation instructions have be made into 17 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15-7537 (P36F001) LCD Hinges.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Inspiron 7537 Hinges

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Inspiron 7537 LCD Hinges

Video tutorial repair manual



Installation and Removal Instructions
Inspiron 15-7537 (P36F001) LCD Hinges

Loosen the screws (2 x M2 x 8mm).

Step 1

  • Loosen the screws (2 x M2 x 8mm).
  • Loosen the captive screws (cannot be removed).
  • Remove the access door.
Loosen the screws (2 x M2 x 8mm).Loosen the captive screws (cannot be removed).Remove the access door.
Remove the screws (3 x M2.5 x 5mm).

Step 2

  • Remove the screws (3 x M2.5 x 5mm).
  • Remove the battery.
Remove the screws (3 x M2.5 x 5mm).Remove the battery.
Remove the screws (2 x M2.5 x 5mm).

Step 3

  • Remove the screws (2 x M2.5 x 5mm).
  • Lift the hard drive out of the laptop.
  • Unplug the hard drive connector.
Remove the screws (2 x M2.5 x 5mm).Lift the hard drive out of the laptop.Unplug the hard drive connector.
Remove the bottom keyboard screw (1 x M2 x 4mm).

Step 4

  • Remove the bottom keyboard screw (1 x M2 x 4mm).
  • Remove the base assembly screws (5 x M2.5 x 5mm)(3 x M2.5x2.5mm).
  • Turn the laptop over and open it up.
Remove the bottom keyboard screw (1 x M2 x 4mm).Remove the base assembly screws (5 x M2.5 x 5mm)(3 x M2.5x2.5mm).Turn the laptop over and open it up.
Press the keyboard clips in and carefully turn the keyboard over.

Step 5

  • Press the keyboard clips in and carefully turn the keyboard over.
  • Unplug the keyboard cables.
Press the keyboard clips in and carefully turn the keyboard over.Unplug the keyboard cables.Press the keyboard clips in and carefully turn the keyboard over.
Remove the palmrest screws (2 x M2.5 x 5mm).

Step 6

  • Remove the palmrest screws (2 x M2.5 x 5mm).
  • Close the laptop and turn it over.
Loosen the antenna cables.

Step 7

  • Loosen the antenna cables.
  • Remove the bottom base assembly.
Loosen the antenna cables.Remove the bottom base assembly.
Unplug the fan cable.

Step 8

  • Unplug the fan cable.
  • Loosen the heatsink screws (cannot be removed).
  • Remove the heatsink.
Unplug the fan cable.Loosen the heatsink screws (cannot be removed).Remove the heatsink.
Unplug the display cables.

Step 9

  • Unplug the display cables.
  • Remove the hinge screws (2 x M2.5 x 5mm).
  • Remove the display assembly.
Unplug the display cables.Remove the hinge screws (2 x M2.5 x 5mm).
Carefully pry and unsnap the hinge cover.

Step 10

  • Carefully pry and unsnap the hinge cover.
Carefully pry and unsnap the hinge cover.Carefully pry and unsnap the hinge cover.Carefully pry and unsnap the hinge cover.
Remove the Middle Hinge Cover.

Step 11

Remove the Middle Hinge Cover.Remove the Middle Hinge Cover.
Pry up the edge of the digitizer.

Step 12

  • Pry up the edge of the digitizer.
Pry up the edge of the digitizer.Pry up the edge of the digitizer.Pry up the edge of the digitizer.
Lift the digitizer & turn it over.

Step 13

Lift the digitizer & turn it over.Unplug the the digitizer cable.
Remove the 4 - M2 x 2mm screws.

Step 14

Remove the 4 - M2 x 2mm screws.Remove the 4 - M2 x 2mm screws.Remove the 4 - M2 x 2mm screws.Remove the 4 - M2 x 2mm screws.
Lift the screen and turn it over.

Step 15

  • Lift the screen and turn it over.
  • Unplug the cable.
  • Remove the LCD Screen.
Lift the screen and turn it over.Unplug the cable.
Remove the 2 - M2 x 4mm screws.

Step 16

Remove the 2 - M2 x 4mm screws.Remove the 4 - M2.5 x 2.5mm Wafer screws.Remove the 2 - M2 x 4mm screws.Remove the 2 - M2 x 4mm screws.
Remove the LCD Hinges.

Step 17

Remove the LCD Hinges.Remove the LCD Hinges.
Inspiron 7537 Hinges

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Inspiron 7537 LCD Hinges

Topics: Dell Inspiron Repair Manuals Dell Laptop Repair Dell Repair Manuals Inspiron 15 (7537) 7000 Series LCD Hinges

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.